£79.99
Brand | |
---|---|
Calibre | .25, 4.5mm, .17 HMR, .17 MK11, .177, .20, .22, .22 (5.5mm), .22 RF |
Condition | |
Gun Type | |
Licence Type | |
Orientation |
Specifically produced in Switzerland by Brugger & Thomet in amalgamation with Anschutz Germany.
Superb Quality, Great Performance and THE choice of MANY TOP RIFLE Makers and Importers.
Model HP22 Anschutz Sound Suppressor / Moderator for use on .177 / .20 / .22 / .25 Air Rifles and / or .17 and .22 Rim Fire Rifles.
LIGHT WEIGHT at only just over 3 ½ oz (102g) with a total dimensions of 6 “ x 1 3/16 “ Diam. (152mm x 30mm). Thread is ½ “ x 20 TPI standard UNF.
These will also strip down with the correct tube (but WHY?).
Standard 1/2″ UNF thread. Detailed with Anschutz too as their official choice worldwide.
NOTE: Fitted to a Section One Firearm they IMMEDIATELY BECOME a Section One Firearm in their own right. Fitted to a Sub 12 Ft/ Lbs Air Rifle they are not subject to any restrictions or license requirement.
ANY and ALL Pre-used Sound Moderators I have should offer up perfectly acceptable performances. Certainly comparable to the equivalent model brand new. Given they are very likely to already be ‘carbonised’ internally there is every chance they will actually increase effectiveness. As with anything not brand new there is a chance they may well not last as long. However this IS reflected in the price. In reality, unless you are regularly spending hours on a range, there should be way over enough ‘life’ still there for the average shot.
The ONLY way to get maximum longevity is to dig that bit deeper and buy new. Happy to order those in where needed so just ask if you prefer.